Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Hollywood
A gate motor in Hollywood, FL faces two enemies at once: salt air off the Atlantic and Intracoastal Waterway, and Florida Building Code HVHZ wind-load requirements that don’t exist in most of the country. A standard operator that would run 10-15 years inland typically lasts 5-7 years here on waterfront property. That’s the reality we plan for. Our Gate Motor & Opener team carries marine-grade actuators, 316 stainless fastener kits, and Florida Product Approved components as standard stock because Hollywood demands it. If your gate is groaning, half-opening, or dead silent, call (754) 714-5786 and a live person answers, any hour.
Why Vance Gate Repair Hollywood Is Hollywood’s Preferred Gate Motor & Opener Company
We work throughout Hollywood, FL every week, from the older ranch-style streets of Hollywood Hills to the Intracoastal condo corridors and the HOA communities west near I-75. Our owner Adrian Vance started in commercial access-control work in 2014, and that background shows in how we document every job: photos of what we found, the limit-switch readings we set, and the part number we installed. You get that record before we leave.
Hollywood customers call us because we price before we work. Not a ballpark, not a “call for a quote.” A written scope and a flat price handed over before anyone picks up a tool. That’s Haven Standard Clause 1, and it applies on every single visit. If the repair isn’t right, the 365-Day Done Right Promise means we make it right, no argument, no fee, for a full year.
We dispatch background-checked, uniformed technicians to every Hollywood job. You’ll know the technician’s name and see a photo before they arrive. When your gate died at 11 p.m. on a Saturday on Sheridan Street, you’re not leaving a voicemail. You’re talking to a person who can put someone on the road. That’s how we work.
Our Gate Motor & Opener Services in Hollywood
Here’s what we actually handle across Hollywood, with the local conditions in mind.
Motor Installation
New gate motor installation in Hollywood means more than bolting a unit to a post. The Florida Building Code puts this city inside Broward County’s High Velocity Hurricane Zone, so the operator and its mounting hardware must be Florida Product Approved and rated for extreme wind loads. We handle that paperwork on your behalf, and we install to code. If your property is on the water, we’ll also recommend 316 stainless fasteners and marine-rated components because standard carbon steel rusts visibly within months on those streets.
Motor Repair
Most Hollywood gate motor failures trace to corrosion on control boards, limit switches, or wiring connections. We don’t replace the whole unit unless it’s genuinely dead. We open the panel, diagnose what failed, replace the failed part, and photograph the new setup. A typical motor repair in Hollywood runs $165-$420 depending on whether we’re swapping a limit switch, a capacitor, or a control board. The written price comes before the work, every time.
Linear Motor
Linear gate motors, which drive a threaded shaft rather than a chain or belt, are common on Hollywood’s slide gates and some older swing conversions. They’re particularly sensitive to salt-air corrosion on the exposed threaded rod. We stock replacement linear arms and shafts for Linear, BFT, and Viking units, and we coat the shaft with an anti-corrosion treatment as part of the install. On waterfront properties off the Intracoastal, that’s the difference between a 2-year and 7-year lifespan.
Slide Motor
Slide gates are the standard for Hollywood’s western HOA communities and many condo properties along the water. Slide motor replacement here typically falls between $850 and $1,600, depending on the brand, gate weight, and whether the rack needs replacement. The rack is a steel or nylon track the motor’s gear rides on. Salt air chews through steel racks fast. When we quote a slide motor job, we check the rack condition first because a new motor on a corroded rack fails early.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Hollywood
We work on nine major gate automation brands, so if you have a BFT on a swing gate, a Linear on a slide gate, a Viking on a condo entrance, or a Ghost Controls on a ranch driveway, you don’t need to argue with a company that only stocks one brand. Our service vans carry common parts for these units, specifically selected for what Hollywood’s salt air kills first: control boards, limit switches, photocells, and relays. That means faster turnaround and usually same-week completion for repaired units.
Common Gate Motor & Opener Problems We See in Hollywood Homes
- Salt-corrosion on control boards and limit switches. This shows up most on waterfront streets off Sheridan Street and toward the Hallandale Beach border. Moisture-laden air gets into the housing, corrodes the board contacts, and the gate starts behaving erratically or dies entirely.
- Worn hinge posts on original 1950s-1970s wrought-iron gates. In Hollywood Hills and Liberia, the original ornamental gates have been in the ground for 50-70 years. The hinge post wears, the gate sags, and the motor’s torque rips the actuator off its mounting. We reset the footing with a deeper pour before replacing the motor so the failure doesn’t repeat.
- HVHZ non-compliant operators flagged after storm inspections. After a hurricane, code inspectors flag older operators that were never Florida Product Approved. You can’t legally repair those in place. We quote the compliant replacement and handle the permit paperwork.
- Battery backups that fail when actually needed. Most battery backups in Hollywood gates were installed years ago, were never load-tested, and the battery is sulfated. We test, replace, and document the new battery’s date and duty rating so it actually works during the next power outage.
Pricing for Gate Motor & Opener in Hollywood, FL
You should know the numbers before you call. Gate motor repair in Hollywood typically runs $165-$420. A full motor replacement on a swing gate runs $700-$1,400 including the operator, mounting, and adjustment. Slide gate motor replacement runs $850-$1,600. Solar gate opener installation for ranch driveways without mains power runs $1,300-$2,200. Battery backup installation runs $240-$600. We write the exact price, in dollars, before any work starts. That’s the Haven Standard. Call (754) 714-5786 and we’ll give you a flat, written estimate at no cost.
We Also Serve Cities Near Hollywood
Our crews cover Hollywood, FL and nearby cities including North Miami Beach, Fort Lauderdale, Miami Gardens, and Plantation. If you’re in any of those areas, the same written pricing and documented service applies. See more about our work across Gate Motor & Opener in Hollywood and the surrounding communities.
Serving Hollywood, FL - Our Local Coverage Area
We’re based in the Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Hollywood
Salt air. Hollywood’s Atlantic beachfront and Intracoastal Waterway corridor push airborne salt onto everything, including gate motors. The salt wicks into control boards, corrodes limit switches, and eats at exposed metal. Davie sits 15 miles inland and doesn’t deal with that. A standard operator rated for 10-15 years inland lasts 5-7 years here unless it’s marine-grade and properly sealed. When we replace a unit on a Hollywood waterfront property, we install with 316 stainless fasteners and marine-rated seals to extend that lifespan as far as the environment allows. Call (754) 714-5786 if your current opener is already failing.
Yes. Hollywood sits in Broward County’s HVHZ, which is the strictest wind-load zone in the Florida Building Code. Any new gate operator or full replacement must use Florida Product Approved components rated for those wind loads. If an inspector flags a non-approved unit after a storm, you can’t legally patch it. We quote the compliant replacement, install it to code, and leave you with the documentation to show the inspector. That’s part of the written scope we hand over before work begins.
Depends on where the sag is. If the gate leaf itself has cracked or the middle is flexing, a welded gusset plate can restore structure. But on Hollywood’s original 1950s-1970s wrought-iron gates, the sag usually traces to a worn hinge post at the footing. Welding a plate won’t fix that. The motor keeps fighting the post, and eventually the actuator tears off its mount. We reset the post with a deeper concrete pour, then re-hang and re-balance the gate before mounting the operator. Our techs can tell you which failure you have within the first 30 minutes on site.
Not uniquely Hollywood, but the salt factor makes it more common here. Battery backups rarely get load-tested, and in this climate the battery terminals corrode and the unit fails when it’s actually needed. We test the battery under load, replace it if it’s sulfated or below its rated capacity, and document the new battery’s date and duty rating in your job record. Then we cycle the gate on battery power to verify it actually works. Most Hollywood homes we visit have never had that test done once.
A photo-eye, which is the infrared beam across the gate opening, should stop and reverse the gate if anything breaks the beam while it’s closing. You can test it yourself with a cardboard box: start the gate closing, break the beam, and the gate should stop and reverse. If it doesn’t, the photo-eye is misaligned, dirty, or dead. Hollywood follows Florida Building Code requirements for gate safety devices, which means photocells are mandatory on automated gates. If yours aren’t functioning, we align, clean, or replace them same-day. Don’t wait for an injury or a code violation. Call (754) 714-5786 for a free estimate.
What Our Hollywood Crews Actually Carry for This City
Here’s what’s different about our Hollywood, FL service trucks. Because the Intracoastal condo corridor between Sheridan Street and the Hallandale Beach border is one of the most corrosive environments in Broward County, we carry 316 stainless fastener kits and marine-grade actuators as standard stock. We don’t have to order those parts. We have them on the truck. We also carry solar gate opener controllers, because Hollywood’s older ranch-style properties, especially the larger lots in Hollywood Hills and along the western edges, often have detached gates far from any mains power. Running conduit half a mile to a gate is bad money when solar plus battery does the job.
Out in Hollywood Hills, a homeowner’s original 1960s swing gate had sagged so badly the motor was fighting the hinge post twice a day. Our tech pulled the panel, reset the post footing with a deeper concrete pour, and upgraded the chain-drive motor to a LiftMaster with a 316 stainless rack and pinion so the salt air off the Intracoastal wouldn’t eat the new gear in three seasons. That job took one full day, and the homeowner got a photo log of every adjustment we made, from the new post depth to the limit-switch positions.
That’s the standard. Written price before work starts. Photographed record when we leave. A gate that works and doesn’t demand another service call next season. If your motor is failing or already dead, call (754) 714-5786. A person answers, and you’ll have a real quote in your hands before anything gets taken apart.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Hollywood, FL since 2014.
Gate Motor & Opener in Nearby Areas
