Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Hollywood?
Installing a new driveway gate in Hollywood, FL typically costs between $2,800 and $7,200 for standard residential projects, though custom ironwork or high-security commercial-grade access systems can push that figure into the $9,500 to $15,000 range. This price includes the physical gate materials, the operator motor, professional installation labor, and the required safety sensor calibration to meet local access codes. Because we operate under The Haven Standard, every price we provide is written down and finalized before we turn a single bolt on your property.
Gate Installation Cost Breakdown (2026)
When you look at the total cost of a gate project in Hollywood, the variables usually break down into materials, the automation system, and the site prep. We find that homeowners often overlook the cost of the structural foundation and the electrical run, which are the most common points of failure in DIY or low-bid projects.
| Service Item | Typical Cost Range |
| :— | :— |
| Single Swing Gate (Steel/Aluminum) | $2,800 – $5,200 |
| Dual Swing Gate (Steel/Aluminum) | $4,200 – $7,800 |
| Sliding Gate System (Residential) | $5,500 – $9,200 |
| Gate Operator Motor (LiftMaster/FAAC/BFT) | $1,200 – $3,500 |
| Safety Sensor & Loop Installation | $450 – $850 |
| Foundation/Concrete Footing Prep | $600 – $1,400 |
*Note: These ranges reflect current labor and material costs in the Hollywood market. Every quote from Vance Gate Repair includes a detailed line-item breakdown, ensuring you know exactly where your investment is going.*
What Affects Gate Installation Pricing in Hollywood
Several factors unique to the local environment influence the total cost of your installation. We look at these specific variables during our initial site visit to provide an accurate, fixed-price quote.
* Gate Material and Weight: Heavy wrought iron gates require stronger hinges and more robust motor torque than aluminum or vinyl options. In Hollywood, the humidity can accelerate corrosion, so we often recommend powder-coated aluminum or galvanized steel to minimize long-term maintenance costs.
* Automation Complexity: Choosing between a simple keypad entry and a full smartphone-integrated system with cameras significantly changes the price. We service all major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and can integrate any of these into your existing smart home setup.
* Electrical Infrastructure: Running power from your home to the gate location is often the “hidden” cost. If your property requires trenching across a long driveway or upgrading your electrical panel to handle the motor load, the labor cost will increase.
* Site Accessibility and Foundation: If your driveway is on a slope or has poor soil drainage, we may need to pour a specialized concrete footer to support the gate weight. Without a solid foundation, the gate will sag, causing the motor to work harder and fail prematurely.
* Permit and Code Compliance: While specific requirements vary by neighborhood, all gates must meet safety standards regarding entrapment prevention. Our installations always include the necessary photo-eyes (the infrared beams that stop the gate if an obstruction is detected) to keep your family and guests safe.
Before
AfterHow to Save on Gate Installation
The most effective way to manage your budget is to prioritize the quality of the motor and the structural integrity of the gate posts. A cheaper motor often leads to higher repair costs within the first two years. We recommend focusing your budget on a reliable operator and a gate material that withstands the salt air common in coastal Florida.
We also offer a free second opinion on any written estimate from another company. If you have a quote from a competitor, bring it to us. Under Clause 1 of The Haven Standard, we provide a written scope and a fixed price before any work begins, so you never have to worry about surprise costs or “discovery fees” added after we arrive.
If you are replacing an existing gate, we can often salvage the current posts if they are structurally sound and plumb. This can save you between $500 and $1,200 on excavation and concrete work. Call (754) 714-5786 to have one of our technicians assess your current setup.
FAQs - Gate Installation Cost
How much does a gate motor replacement cost?
Replacing a gate motor typically costs between $1,400 and $3,200, depending on the brand and the weight capacity required for your gate. This price includes the removal of the old unit, the installation of the new motor, and the recalibration of your limit switches and safety sensors.
Is it cheaper to repair or replace my gate?
In most cases, repair is significantly cheaper than full replacement. We find that many “replacement” recommendations from other companies are unnecessary. If your gate is sagging or the motor is stalling, we can often fix the underlying issue-such as a misaligned photo-eye or a worn-out capacitor-for a fraction of the cost of a new system. Call (754) 714-5786 for a honest assessment of your equipment.
Do you provide upfront pricing?
Yes. Under The Haven Standard, we provide a written price before any work begins. We do not use “estimated” ranges that balloon into larger invoices upon completion. You will know exactly what you are paying before we start the job.
What brands do you service?
We service nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We are not tied to any single manufacturer, which means we can work on whatever motor is already on your property rather than pushing you toward a brand-new system.
Do you offer a warranty on gate installations?
Yes, every completed job is covered by our 365-Day Done Right Promise. If the installation or repair is not right, we make it right at no additional charge to you. We also provide a documented photo record of every adjustment we make, which we leave with you for your records.
Safety and Professional Installation
High-tension springs, heavy-duty sliding tracks, and electrical motors present real risks if handled incorrectly. A residential gate can weigh several hundred pounds; if the limit switches are not set correctly or the safety sensors are misaligned, the gate can pose a serious entrapment hazard. We strongly advise against DIY installation or adjustment of these components. If you are experiencing issues with your gate, call a trained professional who can document the settings and ensure the safety sensors are functioning according to local code.
Every visit from Vance Gate Repair follows our strict documentation habit. Whether we are installing a new system or fixing an existing one, we provide a photo log of what we found, what we adjusted, and what we installed. This is part of our commitment to you: you will never have to guess what a previous technician did because we leave the evidence on every single visit.
If you are ready to move forward with your Gate Installation in Hollywood, or if you simply need a repair on your current system, we are here to help. Our team answers the phone 24 hours a day, 7 days a week. We do not use voicemail loops or automated callback queues. When you call (754) 714-5786, you speak to a person who can schedule your free estimate and answer your questions about gate repair and automation.
Pricing reflects the Hollywood market as of 2026. Vance Gate Repair Hollywood offers Gate Installation services and free estimates - call (754) 714-5786. Written by Adrian Vance, Owner at Vance Gate Repair, serving Hollywood since 2014.
What Our Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.