Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Motor & Opener for Hollywood Homeowners
A gate motor that won’t open or won’t stop can leave your car stuck in the driveway at 6:45 on a Monday morning, or worse, leave your property exposed overnight. Most motor failures in Hollywood come down to three things: a gear stripped by years of salt air, a limit switch that drifted out of adjustment, or a control board that took one too many power surges. We fix all three, usually the same day you call. Vance Gate Repair Hollywood has repaired and installed gate motors since 2014, and we hand you a written price before any tool comes off the truck. Call (754) 714-5786 and a live person answers, day or night.
What you won’t get from us is a verbal estimate that doubles after the motor is off the post. Every job starts with The Haven Standard: a written scope, a written price, and a photo record of what we found, what we set, and what we installed. That’s how Adrian Vance has run this company since 2014, and it’s why Hollywood homeowners don’t pay twice to rediscover a problem we already documented.
Key Takeaways
- Same-day motor repair and replacement across Hollywood, with a live person answering 24/7.
- Written price handed over before any work begins – no surprises on the invoice.
- We service FAAC, BFT, Linear, Viking, and five other major automation brands.
- Every visit includes a photographed record of the motor’s condition, settings, and parts installed.
- 365-Day Done Right Promise: if our repair isn’t right, we make it right at no charge.
What Our Gate Motor & Opener Service Includes
Your gate motor is the muscle that moves a few hundred pounds of steel every single day. When it’s dialed in, you barely notice it. When it’s off by a few degrees, you hear the grinding, see the hesitation, and eventually find the gate frozen halfway open. Here’s exactly what we handle under Gate Motor & Opener in Hollywood.
Motor Installation
A new motor installation starts with measuring the gate’s weight, travel distance, and duty cycle, not with unboxing whatever’s on the shelf. We mount the motor on a reinforced pad or post bracket, wire it to a dedicated circuit, and set the open and close limits to the exact travel of your gate. Before we call the job done, we run the gate through a full cycle test and photograph every setting. You get a written record of the motor’s model, serial number, and limit positions.
Motor Repair
Most motor repairs are mechanical failures that sound electrical: a stripped gear, a seized bearing, or a capacitor that’s lost its charge. We open the housing, identify the failed component, and replace it with an OEM part rather than a universal fit that wears out in a year. If the motor is still worth saving, we say so and quote the repair. If it’s cheaper over two years to replace it, we’ll show you the numbers and let you decide.
Linear Motor
A linear motor, also called a ram or piston actuator, pushes and pulls the gate leaf directly instead of turning a wheel. We replace failed linear actuators, repair leaking piston seals, and adjust the thrust so the gate doesn’t slam at the end of travel. A linear actuator that’s misadjusted will hammer its own mounting bolts loose over time, which is exactly the kind of thing we catch and document in the photo log.
Slide Motor
Slide gates run on track wheels and a chain or rack, but the motor still needs the same attention to limit switches, torque settings, and safety inputs. We repair and replace slide motors for residential and light commercial gates in Hollywood, including gearbox rebuilds and chain tension adjustments. If your slide gate has started pulling to one side or scraping the track, the motor is probably fighting a wheel problem, and we’ll tell you that before quoting a motor replacement.
Intercom Integration
An opener that works with an intercom or entry system needs the motor’s control board to accept a dry contact or wired relay from the intercom’s output. We integrate new motors with existing intercom and telephone entry systems, or add an intercom trigger when a homeowner wants to buzz in visitors from the house. The wiring for this isn’t complicated, but it has to be right: polarity, isolation, and the correct voltage on the trigger input.
Battery Backup
A battery backup keeps the gate operating during a power outage, which in hurricane season is not a convenience. We size the battery to the motor’s draw, install the charger circuit, and test the system by cutting power to the opener and cycling the gate under load. We document the battery’s date, voltage under load, and the charger’s output so you know exactly when it’s time to replace it before the next storm.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterBrands We Service for Gate Motor & Opener
We work on FAAC motors regularly here in Hollywood, and our technicians know the 391, 400, and 770 series well enough to diagnose a limit-switch fault without opening a manual. FAAC units are common on high-end residential gates, and we stock OEM limit switches, capacitors, and gear kits for them. When a FAAC motor fails, it’s usually the actuator seals or a control board that got wet, and we can tell which one within the first ten minutes on site.
BFT and Linear openers account for a large share of the motors we service in South Florida, partly because both brands are common on older and mid-range installations. We keep BFT control boards, transmitters, and photocells in the truck, and we’ve rebuilt enough Linear swing and slide operators to know which capacitors and limit cams fail first. Viking motors are heavy-duty commercial units that occasionally show up on large residential estates, and we service them, too. Whether your motor is a FAAC, BFT, Linear, Viking, or a brand we didn’t name, we can diagnose it on site and quote the repair in writing.
Signs You Need Gate Motor & Opener Right Now
- The gate opens halfway and reverses. A limit switch that’s drifted or a gear that’s missing teeth can make the motor think it’s reached the end of travel when it hasn’t. Every cycle that does this wears the gear a little more, so the failure gets more expensive the longer you wait.
- The motor hums but the gate doesn’t move. A hum without movement is usually the capacitor or a stripped gear. This is a serious sign because the motor is drawing current and building heat while the gate is stuck, which can damage the windings if left running.
- The gate slams open or closed at the end of travel. A motor that isn’t decelerating has a limit switch or torque setting that’s wrong. The impact eventually cracks the gate’s welds, pulls bolts out of the post, and wrecks the motor’s gearbox.
- The opener trips the breaker repeatedly. If the motor pops a breaker, something is drawing more current than the circuit can handle, and that’s usually a failed capacitor, a seized bearing, or a short in the wiring. Don’t reset it and hope; the next reset could burn up a control board.
- You have to press the remote twice or hold it down. This points to a receiver, radio antenna, or control board problem, not a tired battery in the remote. A motor that misses commands is on its way to not responding at all.
If any of these symptoms match what your gate is doing this week, call (754) 714-5786. We’ll send a background-checked technician to your Hollywood address, name and photo provided before arrival.
Our Gate Motor & Opener Process - Step by Step
- 1
Diagnosis and written estimate. The technician arrives, runs the gate through several cycles, opens the motor housing, and checks the limit switches, torque settings, capacitor, gear, and power supply. Then you get a written price for the repair or replacement before any work begins. If you have a written estimate from another company, we’ll review it at no cost and give you a second opinion.
- 2
Approval and parts selection. You sign the written scope with the price on it. If parts are needed, we confirm OEM or quality aftermarket fitment and tell you the part number before we order. We don’t substitute cheaper parts without telling you.
- 3
Repair or installation. We do the work on site, whether it’s a gear replacement, a limit switch reset, a control board swap, or a full motor install. For safety reasons, we disconnect power at the breaker and lock out the circuit while the motor is open.
- 4
Testing and calibration. We cycle the gate under load, adjust the opening and closing force, set the auto-close delay if you have one, and align the photo-eye so the gate reverses when something crosses the beam. Every setting gets photographed as part of the job record.
- 5
Documentation and walkthrough. Before we leave, you get a written photo log showing what was found, what was set, and what was installed, plus the part numbers and date. We walk you through what was changed and what to watch for, and your 365-Day Done Right Promise starts the day we finish.
How Much Does Gate Motor & Opener Cost in Hollywood?
A Gate Motor & Opener cost guide for Hollywood: a service call typically ranges from $95 to $185 for diagnosis, which is credited toward the repair when you approve the work. Motor repairs, like a capacitor or limit switch replacement, usually run $150 to $350 including parts and labor. A full motor replacement, including a new actuator, control board, and labor, generally lands between $950 and $2,400 depending on the motor’s brand, gate weight, and whether the existing bracket and wiring are reusable. Battery backup installation runs $400 to $900 including the battery, charger, and load test.
What drives the price up is a gate that’s been ignored too long: a stripped gear that takes out the shaft, a motor that’s been running with a bad capacitor and burned the windings, or a post that’s leaning and needs re-anchoring before a new motor can be mounted. What keeps the price fair is knowing what you’re paying for before you approve it. That’s the entire point of our written estimate: the price you sign is the price you pay. No added fees for “extra labor” at the end, no surprises on the invoice. Every estimate is free, and if you already have a written quote from another Hollywood gate company, bring it in and we’ll review it at no charge.
Gate Motor & Opener Near Hollywood - Our Service Area
Vance Gate Repair Hollywood dispatches technicians to homes across Hollywood and the surrounding area, including Dania Beach, Pembroke Park, Hallandale Beach, Ojus, Aventura, Sunny Isles Beach, North Miami Beach, Miami Gardens, Cooper City, Fort Lauderdale, and Davie. Most motor repair calls are answered the same day. If you’re in a community off Sheridan Street or near the Intracoastal, we’re likely already working a gate within a few miles of you. See our home page for the full list of what we offer, or check Gate Motor & Opener in Dania Beach or Gate Motor & Opener in Pembroke Park if you’re closer to those areas.
Serving Hollywood, FL - Our Local Coverage Area
We’re based in the Hollywood area and know this community well, and we also handle Gate Motor & Opener - North Miami Beach. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Motor & Opener in Hollywood
A gate motor is the electric actuator that physically moves the gate leaf, and the opener is the full assembly that includes the motor, control board, remote receiver, and safety sensors. In Hollywood, most residential gates use either a swing actuator that pushes the gate like an arm or a slide motor that drives a chain or rack along the ground. When people say “gate opener,” they usually mean the whole system: the motor, the brains, and the safety devices.
A straightforward motor replacement on an existing bracket usually takes 2 to 4 hours, including wiring, limit setting, and testing. If the post or mounting pad needs to be re-poured or reinforced first, that adds a day for concrete to cure before the motor can be mounted. Most Hollywood motor replacements are completed in one visit, and we tell you the timeline in writing before we start. Call (754) 714-5786 for a specific timeframe on your gate.
In Hollywood, motor repairs run $150 to $350 for common issues like capacitors, limit switches, and gear kits, while full motor replacements range from $950 to $2,400 depending on brand and gate size. The variance comes from the actuator’s duty rating, whether the control board needs replacement, and the condition of the existing bracket. Every quote we give is written and itemized before work starts, so the price you sign is the price you pay. For an exact number on your specific gate, call us for a free estimate - we also provide Gate Motor & Opener in Fort Lauderdale.
Yes, we service FAAC, BFT, Linear, and Viking motors regularly across Hollywood, and five additional brands as well: LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock OEM parts for the most common units in our service area and diagnose by symptom, not by brand assumption. If you have a motor from a brand we didn’t list, our technician can still assess it on site and let you know what’s repairable.
Yes, we handle same-day motor failures and emergency calls across Hollywood, and a live person answers the phone 24 hours a day, 7 days a week. If your gate is stuck open and your property is exposed overnight, tell the person on the phone and we’ll prioritize the dispatch. We don’t use voicemail loops or automated attendants, so you’ll reach a real person at (754) 714-5786 no matter the hour.
All completed work is covered by our 365-Day Done Right Promise: if the repair isn’t right within one year, we come back and make it right at no additional charge. No argument, no fee, no expiration date within that window. The promise is straightforward, and it’s in writing on every job record we leave with you.
Clear a path to the motor housing, make sure the gate’s power outlet or breaker is accessible, and move any vehicles at least ten feet from the gate’s swing or slide path. If you have a list of previous repairs or the original motor manual, pull those out; it helps us match parts and settings. You don’t need to be home for the entire visit, but we do need access to the motor and the circuit breaker, and we’ll call you when the technician is on the way.
Schedule Your Gate Motor & Opener Service in Hollywood Today
A gate that won’t open on command, won’t hold its limits, or draws too much current is a problem that compounds every day it’s ignored. Call (754) 714-5786 now for a free, no-obligation estimate on gate motor and opener service in Hollywood. The price you’re quoted is the price you’ll pay, in writing, before we touch a tool. A live person answers day or night.
Written by Adrian Vance, Owner at Vance Gate Repair Hollywood, serving Broward County since 2014.