Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterDriveway Gate in Hollywood, FL
Driveway gate repair in Hollywood, FL usually costs between $150 and $450 for standard adjustments and sensor alignments, while replacing a failing gate motor ranges from $850 to $2,200 depending on the specific equipment installed and the weight of the gate. At Vance Gate Repair Hollywood, we prioritize transparency by providing a written price before any technician picks up a tool. Our team serves homeowners throughout Hollywood, FL who require precise, documented service for their automated entry systems, and we also provide Gate Installation services when a new system is needed. Whether your system uses a slide gate, a swing gate, or a cantilever design, we operate under The Haven Standard: every visit includes a written scope, a clear price, and a photographic record of the work performed.
If you are looking for a new system, please view our Gate Installation in Hollywood service page for details on full system replacements. For immediate assistance with a gate that has stopped moving, call us at (754) 714-5786. We provide a live person to answer your call 24 hours a day, seven days a week.
When You Need Driveway Gate Service
A driveway gate is a mechanical system exposed to the environment 365 days a year. In Hollywood, FL, we see significant wear caused by high humidity and salt air, which accelerates the corrosion of electrical contacts and steel hinges. You should call for a technician when you notice these specific symptoms:
- The gate stops mid-travel: This often indicates that the limit switch has drifted or that the motor is encountering resistance. We frequently find that a limit switch set even a quarter-inch off the proper travel path will cause the control board to trigger a safety stop.
- The gate reverses unexpectedly: If your gate opens or closes a few feet and then immediately reverses direction, the photo-eyes (the infrared beams that detect obstructions) are likely misaligned or dirty. We see this often in Hollywood, FL after heavy rainstorms or high winds.
- Grinding or scraping noises: A gate that makes a loud metallic grinding sound usually has a failing roller bearing or a rusted hinge pin. Ignoring this noise leads to motor burnout, as the operator is forced to work against the friction.
- The remote is unresponsive: If the gate does not move when you press the remote, but the manual override works, the issue is typically a failed radio receiver or a blown fuse on the control board.
- Visible sagging: If the gate is dragging on the concrete, the hinge post has likely shifted or the hinge itself has failed. This puts immense strain on the gate operator arm and can snap the mounting bracket.
- Gate stuck in the open position: This is a security risk. If the gate will not close, it often points to a failure in the ground loop sensor or the main control board logic.
If you suspect a problem with the high-tension springs or the steel cables on your gate, please stay clear of the mechanism. These components are under immense pressure; a sudden release can cause severe injury. Always call a trained professional to manage tension-related repairs.
The Haven Standard: Our Documentation Process
Most service companies offer a verbal estimate and a handshake. Adrian Vance founded this company in 2014 to change that practice. We believe that if a repair is worth doing, it is worth documenting. When we arrive at your property in Hollywood, FL, we perform a systematic inspection of your gate hardware and electrical components.
Under Clause 4 of The Haven Standard, every single visit includes a documented photo record at no additional charge. We photograph what we found, what we adjusted, and what we replaced. We provide this to you before we leave the site. This ensures that if another technician ever works on your gate, they do not have to guess what was done previously. We leave behind a record of the wiring configuration, the limit switch settings, and the part numbers installed. This prevents you from paying twice to rediscover the same problem.
We work on nine major automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because we service a wide variety of motors, we do not steer customers toward a full replacement unless the motor is truly beyond repair. We focus on fixing the component that has failed, whether it is a capacitor, a control board, or a gear assembly.
Before
AfterOur Driveway Gate Process
We follow a strict, repeatable process for every service call in Hollywood, FL to ensure nothing is missed. You can expect the following steps when you work with our team:
- Initial Assessment: We arrive in a fully stocked vehicle and perform a diagnostic check on your gate system. We do not guess the problem; we test the voltage at the board, check the alignment of the photo-eyes, and inspect the physical integrity of the gate structure.
- Written Scope and Price: Before we turn a single screw, we write down exactly what is wrong and exactly how much it will cost to fix. This fulfills Clause 1 of The Haven Standard (Have it in writing). There are no surprise invoices.
- Execution: We perform the repair using the correct parts for your specific brand. If we are working on a Viking or a LiftMaster, we follow the manufacturer’s wiring specifications precisely.
- Documentation: We photograph the completed work, including the new part installation and the adjusted limit switches.
- Verification: We test the gate through multiple cycles to ensure the travel limits are set correctly and the safety sensors are functioning.
- Record Transfer: We provide you with the photo log and the written record of the repair. We also back up this file in our system for your future reference.
If you have a written estimate from another company, we are happy to provide a free second opinion. Bring the paperwork to us, and we will review it to see if the proposed repair is necessary or if there is a more efficient solution. You can return to our home page to see our full range of services.
Driveway Gate Pricing in Hollywood
We believe in upfront pricing. If you’re wondering How Much Does Gate Installation Cost? (2026 Price Guide) - Hollywood, FL, we also provide detailed estimates for new installations. Below are the typical cost ranges for common driveway gate repairs in the Hollywood, FL area. These estimates assume standard residential gate configurations.
| Service Type | Estimated Cost Range |
|---|---|
| Minor Adjustment (Limit switches, sensor cleaning) | $150 - $250 |
| Sensor/Photo-Eye Repair or Alignment | $250 - $450 |
| Hinge Repair or Welding | $300 - $600 |
| Control Board Replacement (Labor + Part) | $600 - $1,200 |
| Full Motor Replacement (Labor + Part) | $850 - $2,200 |
Please note that the final cost depends on the brand of your operator (e.g., FAAC vs. Linear) and the complexity of the installation. We always provide the exact price in writing before we begin the work. Call (754) 714-5786 for an exact quote - estimates are free.
FAQs - Driveway Gate
Can you fix my gate today?
We prioritize same-day service for emergency gate repairs in Hollywood, FL, particularly for gates that are stuck in the open position. Because we operate 24/7 with a live person answering every call, we can often dispatch a technician to address urgent security issues immediately. Call (754) 714-5786 to check our current schedule.
Is it cheaper to repair or replace my driveway gate motor?
In many cases, repairing the existing motor is the more cost-effective choice, especially if the issue is a failed capacitor or a misaligned sensor. We only recommend replacement if the motor housing is severely corroded, the internal gears are stripped, or the control board is obsolete and no longer supported. Our written estimate will clearly outline your options so you can make an informed decision.
Why is my driveway gate making a grinding noise?
A grinding noise usually indicates a mechanical failure in the gearbox or a damaged hinge assembly. In Hollywood, FL, we frequently find that grit and sand from the coastal environment have entered the hinge bearings, causing them to bind. We recommend having this inspected immediately, as continuing to operate the gate will lead to premature failure of the motor and potentially snap the mounting brackets.
What brands do you service?
We have extensive experience with nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our technicians are trained on the specific failure points of these systems, such as the limit switch drift common in older Linear models or the board corrosion issues often seen in Viking units. We do not push one brand over another; we work on the system you already have.
If you are experiencing issues with your gate, do not wait for a complete system failure. Our team at Vance Gate Repair Hollywood is ready to provide a documented, written estimate for your repair. Call (754) 714-5786 today to speak with a professional about your gate.
Written by Adrian Vance, Owner at Vance Gate Repair Hollywood, serving Hollywood.