Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Dania Beach, FL
Gate Access Control in Dania Beach means working against two fronts of salt air. The Atlantic sits east of the city and the Intracoastal Waterway runs along the west, so the housing stock between them takes corrosion from both directions. That eats circuit boards, keypads, and card readers faster than almost anywhere else in Broward County. Call (754) 714-5786 for a written flat price before any work starts.
Why Dania Beach Homes Are Different
Dania Beach carries Broward’s oldest housing stock, incorporated in 1904, with a deep inventory of mid-century concrete-block homes built between the 1950s and 1970s. Many of those properties still run original wrought-iron swing gates that have spent fifty or sixty years in a near-marine environment. By the time we arrive, the gate is usually beyond adjustment. Hinges have seized, posts have rusted through at the base, and the operator, if one was ever added, has a control board that looks like it was left at the bottom of a boat. Waterfront lots along the Intracoastal have been redeveloped into newer estates with motorized slide gates, which creates a split market: corroded legacy iron on older blocks, newer automation on remodeled properties. Both need coastal-grade components. A standard residential operator with a powder-coated steel enclosure fails here within three to five years. We specify marine-rated or NEMA 4X enclosures and stainless hardware because that is the minimum viable installation in this city, not an upsell.
Our Main Dania Beach Services
The two calls we take most from Dania Beach homeowners are access control failures on existing gates and structural repairs that require parts or welding.
Gate Repair in Dania Beach
Hinges on original 1960s iron gates in Dania Beach tend to fail at the pin, and when they do, the gate drops and drags. We cut out the old hinge, weld in a stainless replacement, and reset the swing so the gate travels true. Gate Repair in Dania Beach covers the full breakdown of what we see and what it costs here.
Gate Installation in Dania Beach
New gate work in Dania Beach falls under Broward County’s High-Velocity Hurricane Zone rules, which means wind-load compliance is mandatory on permitted installs. We handle the permitting paperwork, specify hardware that holds up to salt air, and document every step. Gate Installation in Dania Beach walks through the process and the pricing.
Gate Motor & Opener in Dania Beach
Operators in this city fail early when the enclosure is not rated for coastal exposure. We replace motors, swap out corroded control boards, and upgrade enclosures so the next board survives. Gate Motor & Opener in Dania Beach covers the common failures and what replacements cost here.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in Dania Beach
Gate Access Control in Dania Beach fails most often at the board, not the motor. Salt air works its way into enclosures, corrodes solder joints and ribbon connectors, and a keypad or phone entry unit that worked in June stops answering in September. We rebuild or replace the control electronics and put them in an enclosure that will actually survive this environment. Learn more on our Gate Access Control page, then call for a written price.
Keypad Entry
Signs you need it
The keypad works intermittently or stops recognizing codes after a rain event.
What it costs in Dania Beach
Keypad entry replacements in Dania Beach typically run $320 to $780, depending on whether the wiring survived.
How we do it
We test the keypad, replace the unit and wiring, install the new keypad in a sealed enclosure, and photograph the final setup.
Phone Entry
Signs you need it
Calls from the gate unit do not ring through, or callers hear dead air when the system answers.
What it costs in Dania Beach
Phone entry repair in Dania Beach runs $180 to $490, with full unit replacement between $520 and $1,075.
How we do it
We trace the phone line, identify the failed component (relay, board, or keypad), and replace only what failed.
What Gate Access Control Costs in Dania Beach
| Item | Typical range in Dania Beach |
|---|---|
| Keypad entry replacement | $320 – $780 |
| Phone entry repair | $180 – $490 |
| Full phone entry replacement | $520 – $1,075 |
How long does access control repair take in Dania Beach?
Most keypad and phone entry repairs are completed in one visit, typically two to three hours. We keep common boards and keypads on the truck. Call (754) 714-5786 for an exact quote because estimates are free.
Can you install a card reader on my existing Dania Beach gate?
Yes, if the operator has a compatible control board. We add the reader, wire it into the existing system, and test it with the credentials you provide. Call (754) 714-5786 for an exact quote because estimates are free.
Gate Parts & Welding in Dania Beach
Gate Parts & Welding in Dania Beach is usually about rust. The older iron gates on 1950s and 1960s homes along streets west of A1A have hinges that have not moved freely in years, posts that are thin at the base, and frames that sag from decades of salt air. We replace the failed part or weld a repair that actually holds, using stainless or coated steel rated for coastal exposure. Our Gate Parts & Welding page covers the range of work; here is what it costs in this city.
Hinge Replacement
Signs you need it
The gate drags on the ground or the hinge pin is visibly worn or snapped.
What it costs in Dania Beach
Hinge replacement in Dania Beach runs $140 to $320 per hinge, installed and aligned.
How we do it
We cut out the old hinge, weld in a stainless replacement, and adjust the gate so it swings without binding.
Post Replacement
Signs you need it
The post leans, is rusted through at ground level, or wobbles when the gate moves.
What it costs in Dania Beach
Post replacement in Dania Beach runs $360 to $980 depending on post size and the condition of the concrete footing.
How we do it
We remove the old post, set a new galvanized or stainless post in fresh concrete, and remount the gate.
What Gate Parts & Welding Costs in Dania Beach
| Item | Typical range in Dania Beach |
|---|---|
| Hinge replacement | $140 – $320 per hinge |
| Post replacement | $360 – $980 |
| Custom welding repair | $150 – $390 per repair point |
Can you weld my gate without removing it from the hinges?
Often yes, we weld in place when the surrounding metal is sound. If the frame is too far gone around the break, we remove the gate and weld on a bench. Call (754) 714-5786 for an exact quote because estimates are free.
Do you replace rusted gate frames in Dania Beach?
We replace the rusted section or rebuild the frame if the damage is structural. If the frame is too far gone, we will show you the photo evidence and give you a written replacement price. Call (754) 714-5786 for an exact quote because estimates are free.
Brands We Service in Dania Beach
We service LiftMaster, FAAC, Elite, and Mighty Mule operators in Dania Beach, along with five other major brands. Common boards and remote receivers are stocked locally. Turnaround on parts we do not stock is usually two to three days. See our brands for the full list.
Pricing for Gate Repair in Dania Beach, FL
| Service | Typical range in Dania Beach |
|---|---|
| Keypad entry replacement | $320 – $780 |
| Phone entry repair | $180 – $490 |
| Full phone entry replacement | $520 – $1,075 |
| Hinge replacement | $140 – $320 per hinge |
| Post replacement | $360 – $980 |
| Custom welding repair | $150 – $390 per repair point |
| Gate operator repair | $220 – $680 |
| Gate operator replacement | $850 – $1,900 |
| Gate installation (single swing) | $1,800 – $4,500 |
| Slide gate track repair | $340 – $900 |
Prices in Dania Beach push toward the top of these ranges when we find corroded wiring, rusted posts, or enclosures that need full replacement rather than a component swap. Whatever we quote is written down and handed to you before work starts. No surprises at the end.
Neighborhoods We Serve in Dania Beach
We work across the city, from the A1A corridor east of Federal Highway to the residential blocks west toward I-95. Our response time for most Dania Beach calls is under two hours.
- Downtown Dania Beach
- Dania Beach Marina area
- Melaleuca Gardens
- Ravenswood Estates
- Beachside Estates
Service Area - Cities Near Dania Beach
We also cover Hollywood, FL directly south, Pembroke Park, FL to the west, Hallandale Beach, FL further south along the coast, and Ojus, FL to the north. Same crew, same written-price standard.
Serving Dania Beach, FL - Our Local Coverage Area
We’re based in the Dania Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Dania Beach
Most Dania Beach calls are answered on-site in under two hours. A live person answers the phone at (754) 714-5786 at any hour, and we will tell you the dispatch window before you hang up.
New gate installations in Dania Beach require wind-load compliance under Broward County HVHZ rules, and we handle that paperwork. Repairs to existing gates typically do not need a permit unless we are replacing posts or changing the gate footprint.
Many Dania Beach communities have architectural review requirements for gate replacement or operator changes. We provide the spec sheet and close-up photos your HOA board will ask for, plus a written scope you can attach to the approval request.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Dania Beach Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.