Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Wilton Manors
Gate installation in Wilton Manors runs $2,400 to $9,800 for most residential work, depending on whether we’re hanging a single pedestrian gate or a full double driveway gate with automation. What makes Wilton Manors different from every other city we serve is the Middle River canal network: the brackish air and high water table change what materials survive, how deep footings go, and whether an older gate can be salvaged at all. Our crews handle those canal-adjacent conditions routinely, and we document every install with photos and a written record before we leave. Call (754) 714-5786 for a free measure and a written price on your gate project.
Why Vance Gate Repair Hollywood Is Wilton Manors’s Preferred Gate Installation Company
Wilton Manors homeowners call us because we name the problem before we touch the gate. That sounds basic, but around here it’s rare. A gate leaning on the driveway side, a sagging double panel, a motor mount flaking rust three blocks off the Middle River – we tell you what caused it, what the fix costs, and what we’d do differently so it doesn’t return in three years.
Adrian Vance built this company on commercial access-control documentation starting in 2014, then started applying that same habit to residential Wilton Manors gates. Every job, install or repair, leaves you with a photo log showing what was found, what was set, and what was installed. Under our Haven Standard, that’s Clause 4: evidence on every job. You don’t get a handshake and a hope. You get a written price handed over before any work starts, and a record handed over when we finish.
Crews serving Wilton Manors dispatch from our Miami office, so we’re typically on-site within the same window we quote. A live person answers the phone 24 hours a day. Not an answering service. A person who can tell you whether a leaning post needs a re-footing or just a bracket shim, and who can schedule the measure while you’re still on the line.
Our Gate Installation Services in Wilton Manors
We install and retrofit four gate types across Wilton Manors, and each one interacts with the canal environment differently. What holds up on NE 26th Drive may not be what we recommend two blocks off Wilton Drive. Here’s how each breaks down locally.
Driveway Gate
A driveway gate in Wilton Manors is usually the first thing you see pulling up to a 1950s CBS ranch or a newer renovated bungalow. Most of the ornamental iron and aluminum gates added during the 2000s and 2010s renovation wave are now hitting their first major failure cycle. We measure the opening, check the post footings, and tell you plainly whether you’re looking at a fresh install or a retrofit. Typical driveway gate installs here run $3,600 to $9,800 including operator, safety sensors, and the written record of what we set.
Pedestrian Gate
Pedestrian gates on Wilton Manors lots tend to be narrow, close to the house wall or a courtyard fence, and fitted with hardware that was undersized from day one. Hinges seize, latches snap, and the post leans inward because the footing was poured at standard depth in ground that stays saturated. We replace the hardware with stainless or marine-grade components, and when the post is moving, we re-foot it. Most pedestrian gate installs run $2,400 to $4,200.
Sliding Gate
Sliding gates sit on a track or rest on wheels, and in Wilton Manors the failure point is almost always corrosion at the guide rollers and track anchors. On a canal-adjacent lot, brackish air accelerates that rust. We install sliding gates where the driveway geometry demands one, with galvanized track, stainless fasteners, and operators from brands like FAAC or LiftMaster matched to the gate weight. Sliding gate installs including automation typically run $4,800 to $9,500 depending on gate length and operator.
Swing Gate
Swing gates are the most common style in Wilton Manors, and they take the most abuse because their weight hangs entirely on the hinge posts. When a CBS post cracks behind a hinge plate, the repair becomes a two-part job: cut the post, pour a new footing, and reset the gate – often with block patching on the adjacent pillar. We quote that combined work plainly. A single swing gate replacement with new operator and photo-eyes runs about $3,400 to $6,800.
Whichever style you need, the process starts with a free measure and a written price. No verbal ballpark followed by a bigger invoice at the end. The number we hand you is the number on the job record.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Wilton Manors
We install and service LiftMaster, FAAC, Elite, and Mighty Mule automation, among others, on Wilton Manors gates. That matters because most homes here already have an operator bolted to the post, and you shouldn’t have to replace the whole system when the gate itself is fine. We stock common parts for these brands locally and can usually match an existing operator when a replacement board or arm makes more sense than a full swap. If you’ve got an older LiftMaster LA400 or Mighty Mule arm on a Wilton Manors gate, we’ll tell you honestly whether it can be retrofitted or whether UL 325 rules make replacement the only legal path. For a full look at our Gate Installation services and how we handle operator matching, start there.
Common Gate Installation Problems We See in Wilton Manors Homes
- Rust-expanded lag bolts cracking CBS posts. Technicians working streets near the Middle River channels routinely find hinge plates anchored to posts with standard steel lag bolts that have rusted and expanded inside the block. The block face cracks, the hinge loosens, and the gate starts to sag. Fixing it means a rehang plus masonry patch, which we quote as one job.
- Standard steel hinges seizing within five to seven years. Renovation-era gates in Wilton Manors were often hung with non-marine hardware that cannot hold up to the canal microclimate. We see hinges snap clean through on gates that would have lasted twice as long inland. New installs on canal-adjacent streets get stainless or marine-grade hardware, no exceptions.
- Operators failing UL 325 entrapment standards. A dead photocell or a missing edge sensor is not a minor repair. Under current UL 325 rules, repairing an operator that lacks working entrapment protection is illegal. We check the operator, the photocells, and the edge sensors on every install, and we tell you plainly when replacement is the cheaper legal answer.
- Post footings poured at standard depth heaving in saturated ground. Wilton Manors sits nearly encircled by the Middle River, and the water table sits high. A standard 2-foot footing moves within a few years on canal-adjacent streets. Our installs on those blocks go 3 feet deep with epoxy-coated rebar and stainless anchor bolts, because a gate that won’t stay square is not an install, it’s a problem with a warranty.
Pricing for Gate Installation in Wilton Manors, FL
Here’s what gate installation actually runs in Wilton Manors, line by line:
- Pedestrian gate (single, no automation): $2,400-$4,200
- Swing gate (single, with LiftMaster or FAAC operator, photo-eyes): $3,400-$6,800
- Double swing gate (with automated operator, edge sensors): $5,200-$9,800
- Sliding gate (with automation and galvanized track): $4,800-$9,500
- Post re-footing to 3-foot depth with stainless anchors: $800-$1,900 per post
What moves the price is the post condition, the gate weight, whether the existing operator meets UL 325, and how close the gate sits to a canal branch. A gate three blocks off the Middle River that needs re-footing and masonry patching will cost more than a straight swap on a dry interior block, and we’ll show you exactly where those dollars go in the written quote. The price we hand you covers the full job, and we agree on it before any work starts.
We Also Serve Cities Near Wilton Manors
Our crews cover Wilton Manors plus Hollywood, Dania Beach, Pembroke Park, and Hallandale Beach. If your gate is on the edge of Wilton Manors toward Dixie Highway or across the Middle River into Oakland Park, we’ll still come out. For a broader look at the area and how we cover it, see Wilton Manors service details.
Serving Wilton Manors, FL - Our Local Coverage Area
We’re based in the Wilton Manors area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Wilton Manors
If the operator’s photocells and edge sensors are still functional and the unit itself is intact, repair is legal and often the cheaper path. If the entrapment protection is dead – which we see on most 2008-era Wilton Manors gates – UL 325 rules make repair illegal, and you’ll need a new operator. We check the photocells, edge sensors, and board on the free measure, then tell you which side of that line your gate sits on. Call (754) 714-5786 and we’ll put it in writing.
Yes. Three years is short inland, but it’s common on canal-adjacent Wilton Manors lots. Standard 2-foot footings sit in saturated ground, and the brackish air is already working on the anchor hardware. On those streets we pour 3-foot footings with epoxy-coated rebar and stainless anchors. If your post is already leaning, we’ll quote the re-footing separately, and you won’t get a surprise bolt-on fix that lasts one season. Estimates are free.
Usually, yes. The issue is whether the hinge post is still sound inside the block. If the post face is cracked or the hinge lag bolts have rust-expanded, the gate must come off to fix the post, and at that point rehanging the old iron is often still cheaper than buying new panels. We’ll tell you honestly which way the math goes on your Wilton Manors lot, and we’ll only recommend replacement when retrofitting costs more than starting fresh.
Three blocks off the Middle River is enough for brackish air to reach your gate. Motor mounts flake, hinge hardware rusts from the inside, and standard steel fasteners expand. On canal-adjacent Wilton Manors streets, we install stainless or marine-grade hardware and corrosion-resistant operator mounts. If your mount is already gone, we can usually fabricate and install a replacement mount rather than replacing the operator, assuming the operator itself is still sound.
Start with the hinges. Most sagging double gates in Wilton Manors are hinge failures, not panel failures. The inner posts are often fine, and replacing the hinges with heavier stainless units and adding a center support or cane bolt corrects the sag. If the frame is rusted through or the panels are twisted, then new panels make sense. We don’t upsell you into panels when hinges will hold. Call (754) 714-5786 and we’ll measure it and give you the written number.
Written by Adrian Vance, Owner at Vance Gate Repair Hollywood, serving Wilton Manors with documented gate work since 2014.