Gate Realignment in Hollywood, FL

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Gate Realignment in Hollywood, FL

Gate realignment in Hollywood, FL typically costs between $250 and $550, depending on the severity of the sag, the weight of the gate material, and whether the hinge mounting points require structural welding or reinforcement. We perform this service on a same-day or next-day basis for most residential properties in the area. If your gate is dragging, failing to latch, or binding against the receiver, you need an adjustment before the motor gears strip from the added resistance. Call (754) 714-5786 to schedule a technician who will provide a written price before any tools leave the truck.

When you notice your driveway gate failing to close properly, it is rarely just an annoyance; it is a sign of structural stress. We specialize in diagnosing why a gate has shifted-whether it is due to the sandy soil common in Hollywood shifting your post footings, or simply years of wear on the hinges. As part of our standard Gate Repair services, we don’t just “tighten” the gate. We inspect the entire assembly to ensure the weight is properly distributed across the hinge plate. Under The Haven Standard, we document every adjustment with photographs, so you know exactly what was done and why.

When You Need Gate Realignment

You usually notice the need for realignment when the gate stops behaving predictably. In Hollywood, the salt air and humidity can accelerate corrosion on hinge pins and weld points, causing subtle shifts that become major mechanical failures over time. If you notice any of the following, your gate is likely out of alignment:

• The gate drags on the driveway: If you see a visible arc or scratch mark on your concrete, the hinge side is failing or the post has shifted, causing the gate to sag.
• The latch fails to catch: When the gate stops at the receiver but doesn’t lock into place, the gate has dropped just enough that the latch pin is missing the catch plate.
• The motor makes a grinding or straining noise: If the gate is misaligned, the motor is fighting the friction of the dragging gate, which leads to premature gear failure in brands like FAAC or BFT.
• The gate creates a loud “bang” when closing: This indicates the gate is hitting the stop or the receiver too hard because it is no longer traveling along its intended path, likely due to a hinge that has pulled away from the post.
• Visible gaps in hinge pins: If you can see the hinge pin “wobbling” or leaning at an angle rather than sitting flush, the metal fatigue is already well underway.

If you see these symptoms, avoid forcing the gate open or closed. Doing so can snap the gate arm or strip the internal limit switches, turning a simple alignment job into a much larger repair. Call (754) 714-5786 for an assessment. We provide a written scope of work before we start, so you know exactly what the repair entails.

Our Gate Realignment Process

We treat every realignment as a mechanical restoration rather than a quick fix. Because we operate under the Haven Standard, our technicians follow a documented process designed to ensure the gate stays aligned long after we leave.

1. Structural Inspection: We start by checking the gate post footings and the hinge mounting plates for stability. If the post itself has shifted due to ground movement, adjusting the hinges will only be a temporary fix.
2. Hinge and Bearing Assessment: We inspect the load-bearing hinges. On heavier gates, we often find that the bearings have worn down, allowing the gate to sag. We replace the bearings or the entire hinge assembly if the metal has fatigued.
3. Level and Plumb Calibration: Using professional-grade levels, we return the gate to a true vertical position. We adjust the tensioning rods (on chain-link gates) or shim the hinge plates (on ornamental iron or aluminum gates) to restore the factory-intended clearance.
4. Receiver and Latch Adjustment: Once the gate is level, we re-position the catch plate and receiver. This ensures the latch engages smoothly without the motor needing to “force” the gate into the locked position.
5. Documentation and Photo Log: Under Clause 4 of The Haven Standard, we photograph the gate before and after the adjustment. We also photograph the hinge settings and the latch engagement. We leave this record with you, ensuring that if you ever need service again, the next technician has a clear map of what was changed.

Before

After

Gate Realignment Pricing in Hollywood

We believe in upfront pricing. You will never be surprised by an invoice at the end of a visit. Our pricing is based on the specific labor required to restore your gate to safe operation.

The final price depends on the weight and material of your gate. For example, a heavy, wrought-iron gate requires more labor to lift and shim than a lighter aluminum model. If the gate has caused damage to your opener, we will diagnose that separately and include it in the written quote before any work begins. We service brands like Linear and Viking, and we have the parts on hand to perform most realignments on the first trip. Call (754) 714-5786 for an exact quote.

FAQs - Gate Realignment

How do I know if my gate post is the problem or just the hinges?

If the post itself has a visible lean or you see cracks in the concrete around the base, the post foundation is likely the issue. Our technicians test the post stability by applying pressure to the top of the gate; if the entire post moves or flexes, realigning the hinges will not solve the long-term problem, and we will advise you on the necessary structural repair instead.

Can you realign a gate that was installed by a different company?

Yes, we service all major gate brands, including FAAC, BFT, Linear, and Viking, regardless of who installed the system. Because we do not rely on “proprietary” methods, we can evaluate the existing setup and correct the alignment issues on any residential gate system in Hollywood.

Is it cheaper to replace the gate or realign it?

Realignment is almost always significantly cheaper than replacing the gate. Unless the gate frame itself is structurally compromised or rusted through, we can usually restore the original geometry for a fraction of the cost of a new installation. We will always give you a transparent assessment of whether a repair is viable or if the material is too degraded to hold an adjustment.

Do you offer a warranty on gate realignment?

Yes, every repair we perform is covered by our 365-Day Done Right Promise. If the gate shifts out of alignment within one year of our service, we return to fix it at no additional charge. We stand by our work because we document the exact measurements and settings we used during the initial visit, ensuring consistency every time.

If your gate is dragging or failing to latch, do not let the motor struggle against the resistance. A small adjustment today prevents a major motor replacement tomorrow. We are ready to help. Call (754) 714-5786 to speak with a live person and schedule your service.

Written by Adrian Vance, Owner at Vance Gate Repair Hollywood, serving Hollywood.