Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Fort Lauderdale
Gate repair in Fort Lauderdale usually costs between $180 and $340 for a service call that covers diagnosis and a minor fix, while larger jobs like operator replacement or hinge-post reconstruction run $700 to $2,400 depending on the gate’s weight and what the salt air has already done to the steel. Most repairs on swing gates and slide gates are completed same-day once we’re on site, and we answer the phone live around the clock at (754) 714-5786. If you live on a canal, near the ocean, or anywhere in between from Rio Vista to Coral Ridge, your gate hardware ages faster here than almost anywhere else in Florida. We plan repairs around that reality, not around a generic parts chart.
Our crew serves Fort Lauderdale directly, with dispatch coordinated from our South Florida metro office. Background-checked, uniformed technicians arrive with the common operator parts already on the truck, so a dead board or a seized hinge doesn’t mean waiting a week for a second visit. You get a written price before we touch anything, and a photographed record of what we found before we leave.
Why Vance Gate Repair Hollywood Is Fort Lauderdale’s Preferred Gate Repair Company
Fort Lauderdale homeowners call us because we treat gate repair as a documentation job as much as a mechanical one. Every visit ends with a photo log of each adjustment and a written record of every part number installed. That habit came from commercial access-control work starting in 2014, and it means no future technician has to guess what was done, and no homeowner pays twice to rediscover the same failure.
We’ve repaired and installed more than 22,000 gates since 2014, every one with a written price before the job started and a documented record when the technician left. Our Gate Repair team carries a 365-Day Done Right Promise: if the repair isn’t right, we make it right within that year at no additional charge. No argument, no fee, no expiration date. That matters on a welded gate post that’s already been stressed by two hurricane seasons.
When you call, a live person answers. No voicemail loop at 11 p.m. when a stuck gate has your car trapped inside a Rio Vista driveway. We tell you who’s coming, send a name and photo before arrival, and give you the flat price in writing before any work starts. That’s Haven Standard Clause 1, and it’s how every Fort Lauderdale job runs.
Our Gate Repair Services in Fort Lauderdale
Electric Gate Repair
Electric gate repair in Fort Lauderdale is dominated by one local fact: moisture intrusion. Control boards fail when salt-laden air works through vented enclosures, and the failure often looks like an intermittent “gate opens halfway then stops” rather than a clean dead motor. We test limit switches, check the photo-eye alignment, and measure amp draw before replacing anything. In older mid-century canal-front homes off Las Olas Boulevard, we commonly find that the operator still works but the board is corroded past saving. A board replacement typically runs $260 to $480, while a full operator replacement falls between $850 and $1,600 depending on gate weight and brand.
Automatic Gate Repair
Automatic gates in Fort Lauderdale fail differently than inland. The rack and pinion on a slide gate rusts along the tooth line, the chain stretches, and the safety edges crack from UV and salt. We service whatever Fort Lauderdale Gate Motor & Opener is already on the property. LiftMaster, FAAC, Elite, and Mighty Mule are the brands we see most on residential driveways from Victoria Park to Imperial Point. We don’t push replacement when a $95 limit-switch reset restores the travel. When the operator is truly dead, we quote the replacement in writing and install same-week if not same-day on our existing service route through the city.
Hinge & Post Repair
Hinge and post repair is where Fort Lauderdale’s housing stock shows its age. The 1950s-to-1970s canal-front homes in neighborhoods like Coral Ridge and the finger islands often have original wrought-iron swing gates. The steel is thick, but the hinge pins are undersized and the posts were set without drainage. Decades of salt air and splash have seized them. We cut out the old weld, sleeve or rebuild the post base, and set new greaseable hinge bearings. Where the post is rotten to the core below grade, we excavate and set a new post in a concrete pier, then weld the gate back to true. A hinge rebuild on a single swing gate in Fort Lauderdale runs $350 to $800, depending on post condition and gate weight.
Gate Realignment
A gate that’s dragging, binding, or stopped closing halfway is almost always out of alignment. The cause here is often wind. Broward County’s building code demands gate systems in certain exposure categories be engineered for 140-plus mph gusts, but even code-rated installations shift after a storm. Posts flex, hinge plates torque, and the gate leaf drops a fraction of an inch, enough to trip the safety edge and stop the cycle. We re-level the leaves, reset the hinge alignment, and re-program the travel limits after realignment. Realignment on a standard driveway swing gate runs $180 to $320, and we photograph every setting we change so the alignment problem doesn’t get re-diagnosed as a new motor next time.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Fort Lauderdale
We service nine major gate-automation brands, including LiftMaster, FAAC, Elite, and Mighty Mule, so we can work on whatever operator is already mounted on your post rather than steering you toward a replacement because we only stock one line. Our trucks carry boards, remotes, photo-eyes, and limit switches for the brands most common on Fort Lauderdale driveways, which means faster turnaround when your existing operator can be saved. If it can’t be, we quote the replacement in writing and show you exactly why before you approve anything.
Common Gate Repair Problems We See in Fort Lauderdale Homes
- Canal-side corrosion on operator enclosures: Finger-island streets in Las Olas Isles and Harbor Beach sit close enough to the water that salt mist works on the motor housing every single day. Enclosures rust through on a three-to-five-year cycle regardless of brand, and once water reaches the control board, the gate fails erratically. We upgrade to NEMA-4X-rated enclosures and apply dielectric grease to hinge posts as standard practice on canal-front properties.
- Seized hinge pins on original wrought-iron gates: Mid-century homes across Coral Ridge and Rio Vista often still have their original ornamental gates. The iron looks solid, but the hinge pins haven’t been serviceable for years. We replace pins, bore for grease fittings where possible, and rebuild the post base when the rot extends below the concrete.
- Post-storm misalignment from wind load: Every June through November, we see a spike in realignment calls after afternoon thunderstorms and tropical systems. Gates rated for Broward County wind codes still shift when a 140-mph gust hits a solid-leaf gate broadside. Posts bend, safety edges trip, and the gate stops obeying the keypad. We re-square the frame and reset travel limits before diagnosing any motor issue.
- Moisture-shorted photo-eyes and safety edges: Photo-eyes, the infrared beams that stop the gate if something crosses the path, are exposed to Fort Lauderdale’s humidity year-round. A misaligned eye can stop your gate from closing entirely. We check alignment first, then test for internal shorts from moisture. A photo-eye replacement runs $80 to $150 installed, far less than replacing an operator that was never the problem.
Pricing for Gate Repair in Fort Lauderdale, FL
Most repair visits in Fort Lauderdale run between $180 and $340 for the service call and a typical repair like a limit-switch reset, photo-eye alignment, or hinge lubrication with new hardware. Gate realignment falls in that same range. Hinge and post rebuilds run higher: $350 to $800 on a single swing gate, because the work involves cutting, welding, and often excavating a rotted post base. Operator replacement runs $850 to $1,600 for residential swing and slide gates, depending on brand and gate weight. Full control-board replacement with a new enclosure sits at $260 to $480. The price is written and handed to you before any work starts. That’s Clause 1 of the Haven Standard, and it’s non-negotiable on every Fort Lauderdale job. Call (754) 714-5786 for a free estimate and we’ll quote your gate, not a generic chart.
We Also Serve Cities Near Fort Lauderdale
Our technicians cover Fort Lauderdale and the surrounding communities, including Plantation, Hollywood, North Miami Beach, and Miami Gardens. If you’re just outside the city line, give us a call and we’ll confirm coverage for your street. We run a regular service route through Fort Lauderdale all week, which means faster scheduling for nearby zip codes too.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Fort Lauderdale
Because Fort Lauderdale’s 300-plus miles of inland canals push salt-laden moisture into the air on finger islands and canal-front streets that sit miles from the ocean. Las Olas Isles is surrounded by water, and that salt mist works on motor enclosures and circuit boards around the clock. We routinely see operators fail from enclosure rust-through on a three-to-five-year cycle. The fix is a NEMA-4X-rated enclosure and annual dielectric-grease service on the hinge posts and terminal connections. Call (754) 714-5786 to have us inspect your current housing.
Often yes. The wrought iron itself is usually thick enough to survive for decades. What fails on these mid-century Coral Ridge gates is the hinge pin and the post base below grade, where salt-saturated soil corrodes the steel. We cut out the old hinges, rebuild the post base with a concrete pier where needed, and set new greaseable bearings so the gate swings on fresh steel. If the post is sound, we save it. Get the exact quote before any work starts: call (754) 714-5786.
Check the safety edge and photo-eye alignment first, because a gate that binds often trips its own safety system and stops itself mid-cycle. The binding itself usually comes from posts that flexed under the wind load and moved the gate leaf out of square. We measure the post plumb, re-level the gate, reset the travel limits, and only then test the operator. In Rio Vista after a storm, the operator is rarely the cause. Call (754) 714-5786 and we’ll send a technician to assess the frame before recommending any parts replacement.
Yes. Matching a new operator to existing access control is one of the most under-appreciated skills in gate repair, and it’s the work we started doing on commercial sites in 2014. We check the keypad voltage, intercom relay type, and camera power draw before recommending any operator, so the new motor works with your existing hardware instead of forcing you into a full access-control replacement. Call (754) 714-5786 and describe your current setup, and we’ll tell you what’s compatible before you buy anything.
For direct ocean or canal-facing exposure in Fort Lauderdale, we recommend hinge and track service every six to twelve months. The track collects salt and sand, and the rollers corrode faster than the gate leaf itself. Condos along Galt Ocean Mile and the barrier island see the worst of it. A six-month service on a slide gate keeps the track clean, the rollers greased, and the limit switches set, which prevents the gate from shaving years off the operator. Call (754) 714-5786 for a scheduled service quote on your building’s gate.
When your gate fails, you have a printout from the manufacturer that says “contact a qualified technician.” We’re the ones who show up, tell you what failed, show you photos, and hand you the price before we pick up a tool. Call (754) 714-5786 for a free estimate. Written scope, written price, and a live person on the line, 24 hours a day.
Written by Adrian Vance, Owner at Vance Gate Repair Hollywood, serving Fort Lauderdale since 2014.