Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Plantation
Gate installation in Plantation comes with a specific set of constraints you won’t find in most Broward cities: HOA-governed entry gates built in the 1980s, soil that never fully dries out, and property lines tight enough that a swing gate simply won’t clear a fire lane. We handle all of it. Our crews install sliding gates, swing gates, double gates, and pedestrian gates across Plantation every week, from Plantation Acres estate driveways to community entry systems off Broward Boulevard. Call (754) 714-5786 for a written price before any work starts.
Why Vance Gate Repair Hollywood Is Plantation’s Preferred Gate Installation Company
We’re the company Plantation HOA boards call after a storm bends the entry gate and leaves the community open overnight. Not because we advertise the loudest, but because we document everything: the footing condition before we mount an operator, the photo-eye alignment after we finish, the exact part number installed. That record matters in Plantation, where 30-year-old gate systems fail in predictable ways and boards need evidence to justify a replacement to residents.
Our installers know the difference between a sagging hinge post in Plantation Gardens and a stripped limit switch on a swing gate in Jacaranda Lakes. Both happen here constantly. Both get a written diagnosis and a flat price handed over before the first tool comes off the truck. Adrian Vance started this company in 2014 doing commercial access-control documentation, and that habit runs through every residential gate we touch in Plantation.
Plantation customers also get a live person on the phone at any hour. No automated attendant. When a gate sticks open at 2 a.m. and the community is exposed, someone answers and a named technician gets dispatched.
- Written price before any installation work begins, no exceptions.
- Same-day emergency response for post-storm gate failures in Plantation’s HOA communities.
- Photo record of the footing, operator, wiring, and final alignment left with you on every job.
- We service nine major gate-automation brands, so we won’t push a replacement unless the existing system is genuinely done.
Our Gate Installation Services in Plantation
Plantation’s master-planned layout means most installation work falls into a few clear categories. Here’s what we actually do, week in and week out, across the city’s subdivisions and acreage lots.
Sliding Gate Installation
Sliding gates dominate Plantation’s HOA entry points for a reason: they need almost no clearance arc, which matters when the right-of-way butts against a swale or a neighbor’s property line. We install rack-and-pinion slide operators on existing steel and aluminum gates, pour reinforced track slabs where none exist, and set loop detectors at the correct depth for Plantation’s saturated soil. A typical single-vehicle slide gate installation in Plantation runs $4,800 to $8,200 depending on gate weight, operator brand, and whether the existing footing can be reused.
Swing Gate Installation
Swing gates are the default for Plantation Acres driveways and older eastern subdivisions where wrought-iron ornamental gates sit on brick or CBS pilasters. The pilaster is the weak point. We drill and epoxy new hinge anchors rather than surface-mounting to cracked brick, and we set operators with the correct stroke for gates that have sat in saturated ground for decades. Expect $3,200 to $6,500 for a complete single swing gate and operator in Plantation, more for a double swing or a custom ornamental match.
Double Gate Installation
Double gates split the load across two posts, which helps on wider Plantation driveways that would otherwise need a heavy industrial slide. But the synchronization has to be right or the gates bind mid-cycle. We install paired operators with a master-slave control board, set both leaf stops independently, and align photo-eyes so a misaligned beam doesn’t hold the gate open during a downpour. Double gate work in Plantation typically runs $6,000 to $9,800 installed, including both operators, the safety edge, and loop detection.
Pedestrian Gate Installation
Most Plantation communities keep a pedestrian gate beside the vehicle entry, and it fails just as often as the big gate. We install standalone pedestrian gates with magnetic locks, keypad entry, and ADA-compliant hardware where the HOA requires it. In several Plantation HOAs we’ve added a pedestrian bypass keyed to the same access board as the vehicle gate, so residents use one credential for both. Pedestrian gate installations run $1,800 to $3,400 depending on frame material and lock hardware.
Every one of these jobs gets the same treatment from our Gate Installation team: a written scope, a written price, and a photo log handed over when we leave. Under Haven Standard Clause 4, that evidence is included at no charge on every job.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Plantation
We work on the equipment already on the property rather than steering you toward a replacement line. In Plantation, that means a lot of aging FAAC and Linear units from the late 1980s and early 1990s, plus newer BFT and Viking boards where individual communities have upgraded. We stock replacement arms, control boards, loop detectors, and photo-eyes for all nine major brands, so a Plantation install doesn’t stall because a part has to ship from out of state. If your HOA runs Ghost Controls operators on the pedestrian gates, we carry those parts too.
Common Gate Installation Problems We See in Plantation Homes
- Cracked pilasters from saturated soil. Brick and CBS gate posts in Plantation absorb groundwater all summer, crack at the footing, and let the gate sag and bind. We reset the footing and epoxy new anchors before mounting any operator, because a new motor on a cracked post fails inside a year.
- Corroded loop detector wiring in pre-modern conduits. Communities that installed entry gates in the 1980s and early 1990s used conduit sealing practices that don’t hold up to Plantation’s rainy season. Water gets in, the loop wiring corrodes, and gates phantom-open or refuse to close.
- Shared driveways with no room for a swing arc. Many Plantation homes sit on narrow lots with shared access, so a swing gate would cross a neighbor’s property line or block a fire lane. A slide gate solves it, but only if the track bed is poured correctly for Plantation’s soil movement.
- Post-storm alignment failures without footing evaluation. After a named storm, HOA boards in Plantation often approve a fast slide gate replacement. But if nobody checks the hinge post before the operator goes on, the new system fails the next rainy season. We photograph the post before and after every install.
Pricing for Gate Installation in Plantation, FL
Here are the numbers, in writing, the same way we’d hand them to you before starting. A single swing gate on a standard Plantation driveway runs $3,200 to $6,500 installed. A slide gate for an HOA entry or a wide driveway runs $4,800 to $8,200. Double gates run $6,000 to $9,800. Pedestrian gates run $1,800 to $3,400. What moves the price: gate weight and material, whether we’re replacing a cracked footing, whether the existing operator brand needs a control board swap, and how much jackhammer work the track bed requires. You’ll get the exact number in writing before we begin. Call (754) 714-5786 for a free estimate. We also review written estimates from other gate companies in Plantation at no charge.
We Also Serve Cities Near Plantation
Our crews run south into Plantation daily and cover the surrounding metro. If you’re in Fort Lauderdale, Hollywood, Miami Gardens, or North Miami Beach, the same written-price rule applies. Plantation remains our densest service area for HOA gate work, but the documentation standard doesn’t change across the county line.
Serving Plantation, FL - Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Plantation
Plantation’s master-planned communities were built in a narrow window from the late 1950s through the early 1990s, and most entry gates went in during the 1980s construction boom. Those operators, loop detectors, and post footings have roughly the same design life, and Plantation’s saturated soil accelerates the footing decay. So when one 1989 Linear unit fails in Plantation Gardens, three more communities with the same vintage equipment are usually close behind. That’s why we keep a stock of FAAC and Linear control boards and loop detectors at our South FL office specifically for Plantation work. Call (754) 714-5786 if your HOA’s gate is showing its age; we’ll quote the replacement in writing.
Yes, and it’s often the correct choice. Plantation Acres lots are large, but the actual driveway openings between fence lines can be tight. A slide gate needs a flat run beside the opening roughly the width of the gate itself. If that run is available, we pour a reinforced track slab and set the operator. If it isn’t, we’ll tell you before quoting so you don’t pay for a design that won’t fit the easement. Free site assessment in Plantation Acres, no charge for measuring.
Usually not. The sag almost always starts at the hinge post or the pilaster footing, not the operator. We reset the footing, re-anchor the hinges, and realign the gate leaf. In many cases the existing operator then runs fine. If the operator was damaged from running a sagging gate, we replace only the affected parts, and you get a photo record of the before and after. That’s the point of the documentation; you shouldn’t have to trust a verbal diagnosis.
We sequence the work. On a recent FAAC slide gate install in Plantation Gardens, we kept the pedestrian gate running with a temporary keypad while the vehicle gate was down. For communities with only a single entry, we schedule the operator swap in phases: remove the old operator in the morning, mount and wire the new one, and run the gate manually if needed until the control board is commissioned. Residents don’t get locked out. Call (754) 714-5786 and we’ll walk the board through the sequence before we schedule.
The most common failure is a bent hinge post or a shifted footing, not the operator itself. Irma bent gates across Broward in 2017, and Plantation’s saturated soil lets the post lean without snapping the operator. The motor then stalls because the gate line is no longer straight. We do a footing and post evaluation before touching the operator, because replacing the motor on a leaning post is wasted money. In the 48 hours after a storm, we prioritize Plantation HOA emergency calls because a gate left open is a liability the board has to close fast.
Written by Adrian Vance, Owner at Vance Gate Repair Hollywood, serving Plantation since 2014.