Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Fort Lauderdale
Gate installation in Fort Lauderdale starts with a question most companies never ask: what’s the HOA going to approve? In this city, a new driveway gate or pedestrian gate is rarely just a mechanical job. It’s an architectural submission, a corrosion-management decision, and a coordination effort with a management company. We handle all three. Our crews work across Fort Lauderdale weekly, from Rio Vista to Coral Ridge, and we carry the paperwork on every job: written scope, written price, photographic record. If you’re planning a new gate, call (754) 714-5786 and we’ll walk the property first.
Why Vance Gate Repair Hollywood Is Fort Lauderdale’s Preferred Gate Installation Company
Fort Lauderdale homeowners call us because we show up with the documentation habit that most gate companies don’t bother with. Before any gate goes in, you get a written price and a written scope. After the installation, you get a photo log of the post footing, the hinge welds, the operator wiring, and the limit-switch settings. That’s the Haven Standard, and it applies on every single job.
The local work we do here is different from inland Florida. Canal-side salt mist reaches properties across Fort Lauderdale, and it shortens the life of standard gate hardware. We order marine-grade components, specify powder-coated or aluminum where the exposure demands it, and refuse to install a raw steel hinge post in a location where we know it’ll rust through in four years. That kind of call comes from seeing the same failure on the same streets year after year.
Our technicians are background-checked and uniformed, and you’ll get the name and photo of the tech before arrival. Adrian Vance built this company on commercial access-control discipline, and it shows in the records we leave behind.
Our Gate Installation Services in Fort Lauderdale
Swing Gate Installation
Swing gates remain the most common choice for Fort Lauderdale’s mid-century canal-front homes, but the original installations from the 1950s and 60s often used wrought iron that was never rated for salt air. We install swing gates with properly sized posts, sealed welds, and operators from FAAC, LiftMaster, or Elite, depending on the gate weight and the clearance available. On finger-island streets like those in Las Olas Isles, we often recommend a NEMA-4X-rated operator enclosure because the motor housing takes direct salt mist off the canal.
Sliding Gate Installation
For narrow Fort Lauderdale driveways where a swing gate would arc into the street or clip a parked car, a sliding gate is the better answer. The catch: slide gates need a level run on rollers, and canal-side soil movement can rack the track over time. We pour the concrete pad with a slight crown to drain rainwater away from the rollers, then set the gate so the track fasteners stay accessible for future service. A brand-new sliding gate in Fort Lauderdale should not sag or seize in year two; ours don’t, because we build the base right and photograph the install.
Pedestrian Gate Installation
Pedestrian gates serve the walk-in entry alongside a driveway gate, and in Fort Lauderdale’s gated communities they often integrate with the same access-control system as the vehicle gate. That means the keypad, phone app, or remote that opens your pedestrian gate should share the same entry log. We install pedestrian gates with magnetic locks or strike hardware tied into the community’s existing system, so residents don’t carry two remotes.
Security Gate Installation
Security gates in Fort Lauderdale run the range from ornamental picket gates on Las Olas Boulevard estates to heavy automated barriers at HOA entrances. We build for wind-load compliance under Broward County code and specify operators with battery backup where the property’s emergency access depends on the gate opening during an outage. The gate should hold up in a hurricane, and it should still open when the power’s out. We plan both from the first site walk.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Fort Lauderdale
We service and install LiftMaster, FAAC, Elite, and other major automation brands. That matters in Fort Lauderdale because HOA boards often have an existing operator brand on file, and residents sometimes need the new installation to match what the community already maintains. We don’t steer you toward a replacement brand when the current motor still works. We stock common parts locally for Fort Lauderdale jobs, which shortens the wait when a control board or limit switch needs replacing mid-install. One company, nine brands, written price on all of it.
Common Gate Installation Problems We See in Fort Lauderdale Homes
- HOA rejection after the fact. A homeowner picks a beautiful black steel gate, installs it, and the architectural review board objects to the finish or the height. In Fort Lauderdale, many HOAs require pre-approval with drawings. We help you submit the spec and get documented sign-off before any concrete is poured.
- Canal-side corrosion on brand-new hardware. A new hinge post can look perfect in year one and be rusted through by year four. We use marine-grade materials and seal the post base correctly from day one.
- Shared entry systems wired backward. In gated communities, the loop detector that opens the exit gate sometimes gets wired so the gate won’t open automatically, and a resident has to hit a manual override every time. We test the full entry-exit cycle before we call the job done.
- Salt mist killing the operator enclosure. The motor may be fine while the enclosure around it rusts through. We saw this on a finger-island street in Las Olas Isles where the original operator failed not from mechanical wear but because the housing had corroded completely over a few summers. The fix was a sealed NEMA-4X enclosure, a rebuilt post footing with marine-grade concrete, and an annual dielectric-grease service on the new FAAC operator.
Pricing for Gate Installation in Fort Lauderdale, FL
In Fort Lauderdale, a standard single swing gate installation on an existing concrete drive typically runs $1,800 to $3,400, including the gate, posts, hinges, and basic operator. A sliding gate installation runs higher, generally $3,200 to $5,800, because the track bed, rollers, and motor platform add real material and labor. Pedestrian gate installations range $900 to $2,200 depending on the frame material and whether access control ties into the HOA’s existing system. Security gate work with battery backup and full access integration starts around $4,500 and goes up from there. These are installed prices with the written quote handed to you before any work begins. The price we put in writing is the price you pay, and the scope is agreed before a tool comes off the truck.
We Also Serve Cities Near Fort Lauderdale
Our Fort Lauderdale crews regularly cover Plantation, Hollywood, North Miami Beach, and Miami Gardens. If you’re near the Broward-Miami line and need Gate Installation, call us and we’ll confirm the schedule. For homeowners looking for full details on our service across the city, see Gate Installation in Fort Lauderdale.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Fort Lauderdale
Yes, in most Fort Lauderdale HOAs, gate style, height, and finish require architectural approval before installation, and getting it in writing protects you from a costly redo. We prepare a basic spec sheet with dimensions, material, finish, and operator details that you can submit to your board. If the HOA has a specific aesthetic standard, we match it. Don’t install first and ask later; the redo on a powder-coated steel swing gate can wipe out the original budget.
Salt-laden air from Fort Lauderdale’s canals and ocean reaches inland much further than people expect, and standard motor enclosures corrode through on a 3-to-5-year cycle in places like Las Olas Isles, Rio Vista, and Coral Ridge. We replace the operator with a sealed NEMA-4X-rated enclosure and add annual dielectric-grease servicing to hold off the same failure. The motor wasn’t defective; the housing wasn’t built for canal air.
Yes, we integrate new gates with the community’s existing remote controls, keypads, phone apps, and loop detectors. We wire the entry and exit so the gate opens automatically on exit, and we log the access-control programming in the photo record we leave with you. If your HOA uses a specific brand, we work within that brand’s hardware rather than forcing a replacement.
Broward County’s Florida Building Code requires that gates in certain exposure categories withstand 140-plus mph hurricane-force gusts, and the specific rating depends on your property’s location and exposure. We calculate the wind load for your gate dimensions and set the post depth, footing size, and hardware accordingly. A gate that meets code in an inland county may not meet it on a canal-front lot in Fort Lauderdale.
If your driveway is tight, a slide gate usually wins because it runs parallel to the property line instead of swinging into the street or the neighbor’s lawn. Swing gates need clearance for their arc, and on many older Fort Lauderdale lots that clearance simply isn’t there. We measure the actual track space and recommend the option that fits without forcing a compromise. Call (754) 714-5786 and we’ll measure for free.
Get a Written Quote for Your Fort Lauderdale Gate Installation
Planning a gate replacement, a new driveway entry, or a pedestrian gate for your Fort Lauderdale home? Call (754) 714-5786 for a free estimate. We walk the site, talk through the HOA requirements, check the soil and the exposure, and hand you a written price before anything starts. You’ll know exactly what’s going in, why, and what the final invoice will say. That’s the Haven Standard, on every job in Fort Lauderdale.
Written by Adrian Vance, Owner at Vance Gate Repair Hollywood, serving Fort Lauderdale gate installation and repair.
Gate Installation in Nearby Areas