Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Hollywood
Gate repair in Hollywood usually comes down to two things: the salt air eating steel faster than it should, and a builder-grade operator that was never rated for a hurricane zone. Our Hollywood customers call us when a gate drags on the driveway, a motor stops mid-travel, or a hinge post starts leaning toward the pavers. We arrive with the parts a beachside property actually needs, quote a written price before any work starts, and leave a photo record of everything we touched. If your gate is acting up in Hollywood, call (754) 714-5786 and a person answers, day or night.
Why Vance Gate Repair Hollywood Is Hollywood’s Preferred Gate Repair Company
Vance Gate Repair has repaired and installed more than 22,000 gates since 2014, and every single one got a written price before the first tool came off the truck. That’s Haven Standard Clause 1, and it’s non-negotiable. We don’t hand over a verbal guess and hope you’re sitting down when the invoice arrives. You get a flat number on paper, and you approve it before we begin.
Hollywood homeowners see the difference quickly. A customer in Hollywood Hills with a corroded 1960s wrought-iron swing gate told us the previous company quoted over the phone, showed up late, and then “found” extra work. We walked the driveway, photographed the hinge post, and handed her a written scope covering the footing, the hinges, and the operator. One price. Done. That’s the entire point of the Haven Standard.
Our technicians are background-checked, uniformed, and you get a name and photo before they arrive. No mystery crew. No subcontractor roulette. And because dispatch for Hollywood runs from our South Florida office, we know the drive times: Hollywood Hills, downtown near Young Circle, Emerald Hills, and the 33020 beach blocks are all familiar territory.
Every visit ends with a documented photo record: what we found, what we set, what we installed. Wiring diagrams, limit-switch readings, part numbers. If another technician ever works on that gate, they won’t have to guess what happened last time. And under our 365-Day Done Right Promise, if the repair isn’t right, we make it right. No argument, no fee, no expiration date within that year.
Our Gate Repair Services in Hollywood
Hinge & Post Repair
This is the most common call we run in Hollywood’s older neighborhoods. Ornamental wrought-iron gates on 1950s and 1960s ranch homes in Hollywood Hills, Liberia, and the beachside streets near the Broadwalk have spent six or seven decades in salt air. The hinges pit, the post corrodes at the footing, and eventually the gate sags enough to scrape the concrete. We remove the old post, pour a new footing engineered for HVHZ uplift, and install 316 stainless hinges that won’t pit in a salt-spray environment. Plain carbon steel would rust visibly within months on a waterfront property. We don’t use it.
Automatic Gate Repair
Automatic gate repair in Hollywood covers operator failures, limit-switch drift, misaligned photo-eyes, and control boards fried by wind-driven rain. In western HOA communities near I-75, we see builder-grade slide operators that make it through two or three hurricane seasons before the board corrodes and the gate stops answering the remote. The problem isn’t the remote. It’s the electronics sitting in a housing that wasn’t sealed for HVHZ conditions. We replace the board, reseal the enclosure, reset the limits, and photograph the new positions before we leave.
Gate Realignment
A gate that drags, binds, or won’t close fully is usually out of alignment at the hinge or the track. On Hollywood’s paver driveways, ground settling from the wet season shifts posts by half an inch, and that’s enough to wreck the travel. We bring the gate back to true, reset the operator’s open and close limits so it isn’t over-traveling, and confirm the photo-eye sits at the right height. If the gate is steel and the misalignment was caused by rust-jacked hinges, we address the corrosion too, not just the angle.
Weld & Rust Repair
Near the Intracoastal Waterway, rust repair is basically scheduled maintenance. The salt-spray corridor between Sheridan Street and the Hallandale Beach border cuts through steel at a pace that surprises people who moved here from inland. We grind out the rot, weld in new steel where the section is still sound, and replace what isn’t. Marine-grade fasteners go back in, not whatever the hardware store had on the shelf. If the gate is ornamental mid-century iron, we match the repair to the original picket profile so it doesn’t look patched.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Hollywood
We service nine major gate-automation brands, and in Hollywood that matters because the motor already on your gate is usually the one worth fixing. LiftMaster operators are common on the beachside homes and HOA communities west of I-75. Mighty Mule shows up on weekend-installed swing gates all over the 33020 and 33021 zip codes. Elite and FAAC hydraulic operators run some of the heavier ornamental gates in the older neighborhoods. We carry the repair parts and we know the failure points on each one. We’re not going to tell you to rip out a working FAAC because we’d rather sell you a different brand. That’s not how we operate.
Common Gate Repair Problems We See in Hollywood Homes
- Builder-grade slide operators failing after 2-3 hurricane seasons. The motors and control boards in newer western HOA gate systems were never rated for HVHZ wind-driven rain and salt spray. The enclosures leak, the boards corrode, and the HOA is calling us again six months later. A proper Florida Product Approved replacement is the only fix that lasts.
- Manual gates with no conduit run for automation. Houses built during the 2000s boom west of Hollywood often had ornamental gates installed with no power run to the post. Adding an operator means trenching through pavers and coral rock, sometimes hitting the water table in low-lying areas near the Intracoastal. We handle the trench, the conduit, and the operator as one job with one written price.
- Loop detectors corroding at splice points within six months. On waterfront driveway gates, the detector loops that sense a car’s presence fail at the splice where moisture and salt collect. The gate starts false-triggering, closing on cars, or refusing to open. We splice in sealed, marine-rated junctions and position them above the water table.
- HVHZ code violations flagged after storms. Post-hurricane permit inspections in Hollywood routinely flag non-approved hardware on older gate installations. If your gate survived the storm but the hardware isn’t Florida Product Approved, you may need to swap components before the next inspection. We know what inspectors look for in Hollywood, and we quote the fix in writing.
Pricing for Gate Repair in Hollywood, FL
Here’s what Hollywood gate repair actually costs in our market. A hinge and post repair on a mid-century ornamental gate typically runs $450-$900 depending on whether we’re replacing one post or two, and whether the footing needs re-pouring for HVHZ uplift. Automatic gate operator repairs range from $180 for a limit-switch reset or photo-eye realignment up to $1,400-$2,600 for a full operator replacement with a Florida Product Approved motor and a sealed enclosure. Weld and rust repair on an ornamental gate usually lands between $250 and $700 per section, depending on how much steel has to come out. Automating an existing manual gate, including the trench, conduit, operator, and safety photocell, runs $2,800-$5,500 in Hollywood, with the trench and the coral rock being the biggest variables. Every quote is written, itemized, and handed to you before any work starts. You approve the number first. Call (754) 714-5786 for a free estimate on your specific gate.
We Also Serve Cities Near Hollywood
Our Hollywood crews also run calls into North Miami Beach, Fort Lauderdale, Miami Gardens, and Plantation. If you’re just outside the city line and wondering whether our Gate Repair team covers your street, call and ask. Most of the time the answer is yes, and we’ll give you a straight arrival window based on where the truck is that day. For more on what we do across the area, see our Gate Repair in Hollywood page.
Serving Hollywood, FL - Our Local Coverage Area
We’re based in the Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Hollywood
Yes. Hollywood sits in Broward County’s High Velocity Hurricane Zone, and any replacement operator or new gate installation must use Florida Product Approved components rated for the wind loads in this zone. A basic operator swap doesn’t always trigger a full gate permit, but if you’re adding automation to a manual gate or replacing structural posts, you’ll likely need one. We pull the permits, install approved hardware, and leave you with documentation for the inspection. Call (754) 714-5786 and we’ll tell you exactly what your job requires.
The salt spray. Hollywood’s Intracoastal corridor and the immediate beachfront put airborne salt on every exposed component of your gate system. Control boards, limit switches, hinge pins, and splice connections corrode 15 miles west of here at maybe a tenth of that rate. On waterfront Hollywood properties, operator lifespan typically drops from 10-15 years to 5-7 years unless the components are marine-rated. We stock 316 stainless fasteners and marine-grade actuators on our Hollywood trucks for exactly this reason. Call (754) 714-5786 and we can assess whether your gate needs a repair or a corrosion-resistant upgrade.
In most cases, yes. The gate itself is usually fine, especially if it’s a mid-century ornamental piece worth keeping. What’s missing is the power run, the operator arm, and the safety photocell. In Hollywood Hills, we’re typically trenching through pavers and coral rock to get conduit from the house or a nearby power source to the gate post. It’s a full day’s work most times, and the price reflects the trench and the HVHZ-rated operator, not just bolting on a motor. We’ll write it all up before we start.
UL 325 is the national safety standard for automatic gate operators, and it requires photo-eyes, edge sensors, or other entrapment protection on every automated gate. In Hollywood, it’s enforced alongside the Florida Building Code’s HVHZ requirements, so a gate that works fine might still fail an inspection if the safety devices aren’t present or aren’t wired correctly. We set and photograph every limit switch and photo-eye on every job, so the compliance is documented, not just claimed. If you’re not sure whether your current gate meets UL 325, call (754) 714-5786 and we’ll check it.
Yes. Any gate or operator component that faces the wind in Hollywood has to be Florida Product Approved for the HVHZ. That means the hinges, the posts, the fasteners, and the operator mounting system all have to be rated for extreme uplift and wind-driven rain. Standard hardware from a big-box store won’t pass a post-storm inspection, and it may fail before the storm is even over. We install approved hardware on every structural repair, and we photograph it before we leave. If you need a wind-rated gate system or hardware upgrade, call (754) 714-5786 for a written quote.
Call Vance Gate Repair Hollywood for a Written Quote
If your gate in Hollywood is dragging, grinding, stuck open, or dead at the keypad, call (754) 714-5786. A live person answers, day or night, and we’ll get a technician to your neighborhood with a written price before any work begins. We serve all of Hollywood, from the Hollywood Hills mid-century homes to the beachside condos near the Broadwalk to the HOA communities west of I-75. Free estimates, documented photo records on every job, and a 365-Day Done Right Promise on everything we touch. You’ll know the price before we pick up a tool. That’s the Haven Standard.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Hollywood since 2014.
Gate Repair in Nearby Areas
