Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Plantation
Gate repair in Plantation usually means one of two things: a single-family driveway gate that has sagged or stopped opening, or an HOA community entry gate that has failed and now sits half-open while every resident waits. We handle both, and we handle them differently. Most Plantation callers reach a live person at (754) 714-5786 on the first ring, get a written price before any tool comes off the truck, and see a technician the same day for emergencies. We work across Plantation, from the gated communities off Broward Boulevard to the large-lot properties in Plantation Acres, and we know which operators, loop detectors, and access boards each area tends to run.

Why Vance Gate Repair Hollywood Is Plantation’s Preferred Gate Repair Company
Plantation’s gate infrastructure is unlike most of Broward County. The city grew as one of South Florida’s first master-planned communities starting in the late 1950s, which means its HOA subdivisions share a common timeline: most vehicular slide and swing gates went in between 1985 and 1995, and those operators, access boards, and loop detectors are now reaching end-of-life at roughly the same time. We see the result every week. A board replaces one operator, then the community next door starts calling, then the one across the street. Our crews serve Plantation from our South Florida dispatch office, and we have walked enough of these entries to know the difference between a Jacaranda Lakes swing gate and a Plantation Acres slide gate before we arrive.
Every job, including every HOA contract job, runs under The Haven Standard. Clause 1 means a written price is handed over before work starts. Clause 4 means a documented photo record of what was found, adjusted, and replaced is left with the homeowner or property manager on every visit. That documentation habit is why community managers call us back for the next repair rather than starting over with an unfamiliar company.
Our Gate Repair Services in Plantation

Electric Gate Repair
Electric gate repair in Plantation is usually a control board, a loop detector, a limit switch, or a wiring fault rather than a dead motor. On older 1980s and 1990s installations, we often find that the underground conduit has corroded in Plantation’s high water table and the loop detector is reading phantom vehicles or none at all. We diagnose first, show you the reading, and price the repair in writing before replacing anything.

Automatic Gate Repair
Automatic gate repair on a Plantation HOA entry typically means restoring operator function without shutting down vehicle access. A slide gate on a shared driveway cannot sit dead while a board waits for a quote. Our technicians set up a temporary manual-open protocol, keep the keypad live where possible, and repair the operator, rack, or safety edge in place. We work on BFT, Linear, Viking, Ghost Controls, and five other major automation brands, so we repair what is already on the property rather than steering the job toward a replacement.

Hinge & Post Repair
Hinge and post repair is the most common call from Plantation’s eastern subdivisions. The flat, low-lying terrain and the intense June-through-September rainy season saturate the soil, and brick or CBS pilasters from the 1980s crack at the footing. The gate sags, the latch stops lining up, and the opener starts working against itself. Repairing the panel alone is a temporary fix. We reset or reinforce the post, replace the hinge with the correct gauge, and photograph the new position before we leave. Doing it that way means the repair lasts through the next wet season instead of failing again in six months.

Gate Realignment
Gate realignment in Plantation is usually a sagging swing gate or a slide gate that has come off its track after a storm. In Plantation Acres, where heavy private driveway gates run on long fence lines, a bent frame or a stripped pinion gear after a wind event is common. We bring the gate back to level, reset the limit switch travel, and verify the safety edges and photo-eyes before calling the job done. The written record that comes with the job shows every adjustment we made.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Plantation
We service nine gate-automation brands, including BFT, Linear, Viking, and Ghost Controls, which covers most of what Plantation’s older HOA entries and newer private driveways actually run. That range matters here because a 1994 community slide gate and a 2019 Plantation Acres swing gate rarely share the same brand. We arrive with the right parts and the right programming notes for the operator on site. If we need a specific board or safety edge, we can usually have it in hand the same day for Plantation jobs.

Common Gate Repair Problems We See in Plantation Homes

- Post footing cracks from soil saturation. Plantation’s flat terrain and rainy season keep the ground wet for months, which heaves concrete pilasters and cracks them at the base. A gate that sags after rain is usually a post problem, not a hinge problem.
- Corroded underground wiring and faulty loop detectors. Conduits installed before modern sealing practices sit in Plantation’s high water table, and the failure shows up as intermittent keypad entry, phantom vehicle detection, or a gate that stops and reverses for no visible reason.
- Post-storm damage to slide gates and operators. After Hurricane Irma and every named storm since, we see bent frames, stripped pinion gears on slide gates, and limit switches thrown out of alignment across multiple Plantation HOA communities at once.
- End-of-life control boards on 1985-1995 HOA installations. The access boards and operators installed when Plantation’s subdivisions were built are now failing on a predictable schedule. Boards often wait too long because the gate still opens manually, but the electrical fault only widens and takes the motor with it.
Pricing for Gate Repair in Plantation, FL
Most gate repair in Plantation falls into clear ranges, and we put those ranges in writing before any work begins. A swing gate realignment or hinge replacement typically runs $180 to $360 depending on post condition and whether reinforcement is needed. Electric gate repairs, including a loop detector or limit switch replacement, usually land between $240 and $450. A full slide gate operator replacement on an HOA entry runs $1,100 to $2,400 depending on the brand, gate weight, and whether the rack and pinion gear needs replacement at the same time. In Plantation Acres, where long heavy driveway gates require larger hardware, expect the upper end of those ranges. We never hand you a quote after the work. The written price covers the job, and the photo record shows what that price paid for. Call (754) 714-5786 for a free estimate on your specific gate.
We Also Serve Cities Near Plantation

Our crews work across South Florida, and we regularly take calls from Fort Lauderdale, Hollywood, Miami Gardens, and North Miami Beach. If your property sits near the Plantation line and you are not sure who to call, ask us directly. Gate Repair work in any of these cities gets the same written price and documented record as the jobs we do in Plantation.
Serving Plantation, FL - Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Plantation

Plantation’s HOA communities share the same installation era and the same storm exposure. When a named storm passes through, wind bends slide and swing gate frames, strips limit switches, and throws operators out of alignment across dozens of subdivisions at once. The failures are not random. They cluster because the gates are the same age, the same design, and the same wind load. Boards without a service contract end up waiting because every gate company in Broward is busy the same week. Call (754) 714-5786 early if your community gate is down after a storm. Existing service-contract customers get priority in the post-storm window.
We check the post footing before we touch the panel. Plantation Acres has large-lot properties with long fence runs and heavy driveway gates, and the same saturated soil that keeps the grass green also heaves and cracks the post base. If the post has moved, a new hinge or a panel adjustment will not hold. We reset the post, reinforce the footing where needed, then rehang the gate and set the travel limits. That sequence prevents a repeat repair six months from now. Call (754) 714-5786 and we will diagnose the post before recommending any panel work.
Yes. We keep one access lane open and the keypad entry live while we work on the operator, the rack, or the safety edges. On shared driveways and rights of way, shutting the gate down entirely is not an option, so our technicians stage the repair in sections. We cut power to the operator only, not the entry system, and we keep a manual-open protocol in place for the fence crew or any resident who needs to pass. The gate stays functional for traffic throughout the job. Call (754) 714-5786 and we will schedule the repair around the community’s movement, not against it.
In Plantation, the rainy season raises the water table, and water finds its way into underground wiring conduits installed before modern sealing practices. A keypad that fails only between June and September is almost always a conduit or splice problem, not a keypad problem. The intermittent fault shows up as a dead keypad, phantom activations, or a gate that opens and then reverses. We test the loop, trace the wiring run, and replace the corroded section rather than swapping the keypad and hoping. Call (754) 714-5786 for a diagnosis before the next heavy rain.
For a Plantation HOA, we can usually have a technician on site within 24 to 48 hours of a named storm, with existing service-contract customers prioritized first. A bent slide gate frame with a stripped pinion gear is a repair we have done many times in Plantation, including a Plantation Acres horse property where a 16-foot slide gate had to stay open for trailer access while we cut power, removed the rack and pinion gear, and installed a new steel rack section with welded gussets. The keypad stayed live the whole time. If your board is facing a security gap because the gate is chained open, call (754) 714-5786 and tell us the community name. We will tell you honestly when we can be there.
If your gate is down in Plantation, call (754) 714-5786. You will get a live person, a written price, and a technician who leaves a documented record of exactly what was found and what was fixed.
Written by Adrian Vance, Owner at Vance Gate Repair Hollywood, serving Plantation since 2014.





Before
After
Before
After
Before
After